Hitachi c28wf540n 사용자 설명서

GB - 15 -

When APS has finished a table of all the channels tuned in

will be displayed on the screen. If you are not happy with the

line up of the channels this can be changed. Please refer to

the section on how to delete and insert a channel from a pro-

gramme number located in the MANUAL SETUP section.

If you do not want the stations to be stored automatically,

cancel APS pressing TV button.

If you want to continue, then first by pressing the

buttons, come to the Tuning Mode item and select

the mode at which your TV will run the APS. If you select

Channel Tuning Mode, APS will run according to Channel

Tuning Mode and will auto-search according to the Channel

numbers of the stations in your area. If you select Fre-

quency Tuning Mode, APS will run according to Frequency

Tuning Mode and will auto-search according to the frequen-

cies of the stations in your area. Selected tuning mode will

appear in the highlightened bar at the bottom of the WARN-

ING menu.

Then, after selecting the Tuning Mode if you want to start

APS, by pressing the

buttons, come to the

Start item and by pressing

button start the

APS.

When you start APS the below menu will appear on the

screen.

After APS is finalized, a rank list will appear on the screen. In

the rank list you will see the programme numbers and

names, assigned to the programmes. First the programme

with programme number 1 will be displayed and the pro-
gramme number 1 will be flashing. Using

key you can move the flashing number and

then display the programme corresponding to the flashing

number pressing RED button.
If you do not accept the correspondence between programme
numbers and names and want to change them, press

MENU button and then BLUE button, so that you enter the

Install menu. In the Install menu select TUNING menu and

enter it. To use tuning menu, refer to the Tuning submenu in

the Install Menu section of this manual.

TV Setup Menu

This menu is used to select the Menu Language, the Country

name and to select source of AV-2 Out (Scart2).

Selecting Menu Language
To select menu language:
Press the "

MENU" button so that you enter the main

menu.

In the main menu select Install using the

but-

tons.

Open the install menu by pressing either of the

buttons.

(The Install menu can be entered directly by pressing the

blue button on the remote control handset.)
In the Install Menu select TV SETUP using the

buttons.

Open the TV SETUP Menu using either of the

buttons.

In the TV SETUP Menu select language and you can

change the language to the one you require, using either of
the

buttons. As soon as you change the lan-

guage, the menu items will be displayed in the selected lan-

guage.

Selecting the Country

Press the "

MENU" button so that you enter the main

menu.

In the main menu select Install using the

but-

tons.

Open the Install menu by pressing either of the

buttons.

(To open the Install Menu directly, do not enter the main

menu just press the BLUE button located on the remote con-

trol handset.)
In the install menu select TV Setup using the

buttons.

In the TV Setup menu select Country using the

buttons.

The country can be changed by pressing either of the

' buttons.

Setting External Source Output
You can use this menu to select the internal or external

source that will be output at EXT2 or Back AV Output. To

set AV-2 Output:

Press

MENU button so that you enter the main menu.

In the main menu select Install using

button.

Open the Install Menu pressing

button. (To

open the Install Menu directly, do not enter the main menu

but only press the BLUE button).

In the Install Menu select TV Setup using

button.

IB-ENG-PLL-STEREO-AK33-UK-(C28WF540N-C32WF540N-28&3217W).p65

29.08.2002, 13:07