Garmin eTrex Vista 사용자 설명서

19

When you manually turn the Compass Off, it stays 

off until you manually turn it On again. Sometimes, 
however, when you turn the Compass On, the eTrex 
Vista overrides the Compass and uses the GPS receiver 
to track your heading. The criteria for switching between 
the Compass and the GPS is customized on the ‘Heading’ 
Setup Page. (See page 51.)

1.   Use the PAGE

  

button to access the Navigation 

Page. 

2.   Use the CLICK STICK to highlight the Options 

Menu  on-screen button and then press it in.

3.   Highlight the ‘Calibrate Compass’ option and press 

the CLICK STICK to display the Calibration Page.

4.   Press the CLICK STICK to activate the ‘Start’ 

button and then follow on-screen directions for 
holding and turning the unit. 

     The unit displays a “Just Right”, “Too Fast” or “Too 

Slow” message for you to adjust your turning speed 
as needed. 

     The “Calibration Successful” message displays when 

fi nished. If a “Calibration Failed” message displays, 
repeat the process.

The Electronic Compass must be calibrated outdoors 

when you fi rst use the eTrex Vista and after new batter-
ies have been installed. The accuracy of the Electronic 
Compass is adversely affected if the unit is not held level 
or by nearby items that generate magnetic fi elds, such as 
cars and buildings, etc. 

190-00219-00_0C.indd   19

9/20/2002, 9:54:24 AM