Garmin eTrex Vista 사용자 설명서

22

The Altimeter Page provides you with a variety of 

elevation information: A Status Window that displays cur-
rent elevation and current rate of ascent/descent, a profi le 
of elevation changes over distance or time, a profi le of 
pressure changes over time, and two user selectable data 
 fi elds.

The Status Window is located at the top of the page 

and displays the current elevation and your current rate 
of ascent or descent when moving. It can also display the 
ambient pressure.

The  Profi le Field is located in the center of the page 

and can be confi gured to display either elevation or ambi-
ent pressure plots as selected from the Altimeter Page 
Options Menu.

Data  Fields at the bottom of the page are user select-

able and display a variety of recorded or current data.

The Page Options Menu allows you to select the 

type of information and how it is to be displayed. Page 
Options include: ‘Plot Over Time’, ‘Plot Over Distance’, 
‘View Elevation Plot’, ‘View Pressure Plot’, ‘Zoom Ranges’, 
‘View Points’, ‘Reset’, ‘Calibrate Altimeter’, and ‘Restore 
Defaults’.

You can customize the ‘View’ option displays using 

the ‘Zoom Ranges’ option to determine time, distance, 
pressure, and elevation parameters. If you know the 
correct elevation for your location, you can increase the 
accuracy of the altimeter using the ‘ Calibrate Altimeter’ 
option. Use the ‘Reset’ option to clear recorded data from 
the page and to begin recording new data. 

These two measurement options (changes over a set 

period of time or changes over a set distance) apply only 
to the ‘View Elevation Plot’ option, while the ‘View Pres-
sure Plot’ option is measured by time and pressure only. 
When one option is active, the other is displayed on the 
Page Options Menu.

190-00219-00_0C.indd   22

9/20/2002, 9:54:26 AM