Garmin eTrex Vista 사용자 설명서

Main Menu

Routes Options

Adding a Route Waypoint to

an end point on the Route

Map Page

Map Page Route Options

Moving a Route Waypoint by

clicking and dragging.

To move a route waypoint:

1. Select the waypoint from the Route Waypoints

List and press the CLICK STICK in to access the
Options Menu for the waypoint.

2. Highlight the ‘Move’ option and press in on the

CLICK STICK to select the waypoint.

3. Use the CLICK STICK to move the waypoint up or

down in the list. Press in on the CLICK STICK to
leave the waypoint in the new list order.

Adding or Editing from the Route Map Page

You can use the panning arrow with the Route Map

Page displayed to add or edit route waypoints.

To add a waypoint at either end of a route:

1. Select the Route from the Routes List and press the

CLICK STICK in to display the Route Page.

2. Highlight the on-screen ‘Map’ button at the bottom

of the page and press in on the CLICK STICK to
display the Route Map Page.

3. Use the CLICK STICK to move the panning arrow

to either end of the displayed route until the end
waypoint is highlighted. Then press it in to display
the map Options Menu and select ‘Add Turns’. This
option appears only when highlighting the end
point of a route.

4. Move the panning arrow to a map item or location

where you would like to extend the route and press
in on the CLICK STICK to display the Information
Page for the new waypoint. Press the on-screen
‘OK’ button to return to the map page and then
press it again to place the new waypoint.

To add a route waypoint within a route:

1. Follow steps 1 and 2 in the previous instruction.

2. Use the CLICK STICK to move the panning arrow

to a route line. When the arrow touches the line,
the line becomes thin. Press in on the CLICK STICK
to display the word ‘ADD’ next to the line.

3. Drag the line to a map item or other location where

you want to establish a new waypoint and then

190-00219-00_0C.indd 44

9/20/2002, 9:54:37 AM