Hitachi dz-hs301e(uk) 사용자 설명서

다운로드
페이지 161
English
130
[When using Macintosh]
USING PIXE VRF BROWSER EX AND IMAGEMIXER VCD/DVD2
Pixe VRF Browser EX allows you to import the images on DVD-RAM/DVD-RW/DVD-R recorded 
on the DVD video camera/recorder into PC as an MPEG file. ImageMixer VCD/DVD2 allows you to 
use the images imported by Pixe VRF Browser EX to create a DVD-Video (DVD-RW/DVD-R).
The following shows the basic operations of Pixe VRF Browser EX and ImageMixer VCD/DVD2.
Refer to the electronic instruction manuals that can be read on PC for detailed instructions of Pixe 
VRF Browser EX and ImageMixer VCD/DVD2. See the electronic instruction manuals for the 
detailed use method of each software programme.
For Pixe VRF Browser EX, click “Help” - “Pixe VRF Browser EX Help” while it is being started up.
For ImageMixer VCD/DVD2, click the question ? mark at the top right of the folder select screen.
To start Pixe VRF Browser EX and ImageMixer VCD/DVD2, double-click the “Pixe VRF Browser EX 
for DVDCAM” icon and “ImageMixerVCD/DVD2” icon in Macintosh HD (startup disk) - 
“Applications” - “ImageMixer for DVDCAM”.
Note
:
• The provided software cannot be used to burn a DVD-VR (DVD-RAM/DVD-RW): It is also incompatible with a +RW.
IMPORTING IMAGES RECORDED ON DVD-RAM/DVD-RW/DVD-R INTO PC 
TO CREATE A DVD-VIDEO (DVD-RW/DVD-R)
You can use the images recorded on the DVD video camera/recorder to create a disc that can be 
viewed on DVD recorders/players.
* Any DVD-RW/DVD-R recorded on this DVD video camera/recorder must be finalised
(see page 108). 
1
Connect this DVD video camera/recorder to 
the USB port of PC.
To save images recorded on a disc, first insert 
the disc you wish to save into the DVD video 
camera/recorder, and then connect the DVD 
video camera/recorder to the USB port of PC.
2
Start Pixe VRF Browser EX and choose the drive.
Clicking the “Drive” icon will display the 
drive select screen. Choose “HITACHI DZ-
USBHDD” when the power switch is set to 
“HDD”, “Hitachi DVD-RAM DZ-GBX3” 
when it is set to “DVD”, and then click “OK”.
If you wish to change the import device, and 
continue import, unplug the PC connection 
cable from the PC, and then change over the 
power switch (see page 121).
Click
Click