ICOM mr-1000t3 사용자 설명서
7
3
MENU
■ ATA (Automatic Tracking Aid)
D ATA
• OFF
• OFF
: Turn the ATA function OFF.
• ON
: Turn the ATA function ON.
D No.DISP
• OFF
• OFF
: Non display any mark number.
• Sel
: Display the selected mark number
only.
• ALL
: Display all mark numbers.
D VECT
• TRUE
• TRUE
: Select the true vector mode.
• REL
: Select the relative vector mode.
D OWN VECT
• OFF
• OFF
: Non display the own ship vector.
• ON
: Display your own ship’s vector.
D ALARM (CPA/TCPA)
• OFF
• OFF
: Turn the alarm function OFF.
• ON
: Turn the alarm function ON.
D CPA* LIMIT
• 0.1 to 10.0NM : Set the CPA (Closest Point of Ap-
• 0.1 to 10.0NM : Set the CPA (Closest Point of Ap-
proach) limit with [Ω ≈].
D TCPA* LIMIT
• 1 to 60MIN
• 1 to 60MIN
: Set the TCPA (Time to CPA) limit time
with [Ω ≈].
*CPA/TCPA: Closest Point of Approach and Time to Clos-
est Point of Approach limit is defined by the observer to
given warning when a target or targets are close to
within those limits from your own ship.
given warning when a target or targets are close to
within those limits from your own ship.
■ INT. SETTING
D MAG VAR
• AUTO
• AUTO
: Revise magnetic variation automatically.
NOTE: NMEA data is required. NEVER select
“AUTO” without NMEA data, incorrect varia-
tion data may entered. (p. 39)
“AUTO” without NMEA data, incorrect varia-
tion data may entered. (p. 39)
• MANUAL : Revise magnetic variation manually.
• Push [≈] to select [MANUAL], then push
[Ú]. Set the revise value with [Ω ≈].
Push [Ú] or [MENU] to abort the menu.
Push [Ú] or [MENU] to abort the menu.
D BRG INPUT
• NMEA
• NMEA
: NMEA0183 bearing data format.
• N+1
: N+1 data format.
• AUX
: Other format.
• GPS
: Reads NMEA0183 COG format data as
HDG format.
D SPD INPUT
• GPS
• GPS
: Use the GPS NMEA speed data.
• LOG
: Use the speed sensor data.
D TX INH START
• 0 to 359° : Push [Ω ≈] to enter the start point of the
• 0 to 359° : Push [Ω ≈] to enter the start point of the
TX inhibit area.
D TX INH ANGLE
• 0 to 90°
• 0 to 90°
: Push [Ω ≈] to enter the TX inhibit area.
D SAVE TIME
• 1M, 6M, 15M or 30M
• 1M, 6M, 15M or 30M
: Select the stand by time during save
mode.
* The radar for TX interval scan is fixed at 10 revolutions.
D SYMBOL
• 1/2/3
• 1/2/3
: Select the symbol brightness.
D CHARACTER
• 1/2/3
• 1/2/3
: Select the character brightness.
D KEY ILLUM
• 1/2/3/4
• 1/2/3/4
: Select the key illumination brightness.
INT. SETTING
BRG INPUT
SPD INPUT
TX INH START
TX INH ANGLE
SAVE TIME
SYMBOL
CHARACTER
SPD INPUT
TX INH START
TX INH ANGLE
SAVE TIME
SYMBOL
CHARACTER
BRILL
NMEA
30M
LOG
6M
15M
MANUAL
AUTO
N+1
AUX
GPS
GPS
0
˚
0
˚
KEY ILLUM
MAG VAR
1
2
3
1
2
3
1
2
3
4
7.2
˚
W
1M
A T A MENU
VECT
No.DISP
OFF
ALL
OWN VECT
ALARM
CPA LIMIT
TCPA LIMIT
TCPA LIMIT
TRUE
ON
ON
ON
OFF
REL
OFF
OFF
OFF
1.0NM
1 MIN
A T A
SEL