Hanna Instruments hi 9141 사용자 설명서
21
21
PRINTING / LOGGING
WITH HI 91410
To print the measured values
shown on display, press the
PRINT key.
shown on display, press the
PRINT key.
This function can be activated
in normal operation mode as
well as during logging (see below).
in normal operation mode as
well as during logging (see below).
When in measurement mode, the printout
provides the following information:
a - Running sample number
b - Date (DD-MM-YY)
c - Time (HH-MM)
d - D.O. value in ppm.
e - T e m p e r a t u r e
provides the following information:
a - Running sample number
b - Date (DD-MM-YY)
c - Time (HH-MM)
d - D.O. value in ppm.
e - T e m p e r a t u r e
value in °C.
LOGGING MODE
This function is suggested when remote mea-
surements have to be taken automatically
without the necessity of an operator and for a
long period of time. In this mode data will be
stored directly into memory.
surements have to be taken automatically
without the necessity of an operator and for a
long period of time. In this mode data will be
stored directly into memory.
Set the appropriate logging interval (see
page 13).
page 13).
Press the LOG key to enter the logging mode.
The log number and page number will appear
for a few seconds on the display to indicate
the correct operational mode.
The log number and page number will appear
for a few seconds on the display to indicate
the correct operational mode.
The printer will print a complete set of data
and the "LOG" symbol will appear on the
bottom left corner of the LCD.
and the "LOG" symbol will appear on the
bottom left corner of the LCD.
PRINT
a
b
c
d
e
LOG
LOG
Log number
Page Number
1 4 - 0 1 - 9 6
0 0 0 1 * 1 6 . 5 0
8 . 9 5 p p m
2 0 . 4 ° C
<>
Untitled-22
22
22
1 4 - 0 1 - 9 6
- - 0 2 - -
0 0 0 5 M
0 0 0 1 * 1 6 . 5 0
8 . 9 5 p p m
2 0 . 4 ° C
<>
a
b
c
d
e
f
g
The printout provides the following informa-
tion:
a - A running log number
b - Running sample number (in that particular
tion:
a - A running log number
b - Running sample number (in that particular
log)
c - Date (DD-MM-YY)
d - Printing interval indicator in minutes
e - Time (HH-MM)
f - D.O. value in
d - Printing interval indicator in minutes
e - Time (HH-MM)
f - D.O. value in
ppm.
g - T e m p e r a t u r e
value in °C.
To continue logging without printing, press
now the CAL key and the "LOG" symbol on
display will start to blink and no printout will
be generated.
now the CAL key and the "LOG" symbol on
display will start to blink and no printout will
be generated.
If you wish to restart printing press the CAL
key again.
key again.
Notes:
•
Once in the logging mode,
the interval cannot be
changed. Exit the logging
mode first (pressing the
LOG key) before setting
the new interval.
the interval cannot be
changed. Exit the logging
mode first (pressing the
LOG key) before setting
the new interval.
•
If the PRINT key is pressed
while in logging mode, a
printout is produced with-
out affecting the running
sample number.
while in logging mode, a
printout is produced with-
out affecting the running
sample number.
PRINT
CAL
LOG
LOG