Hanna Instruments hi 9141 사용자 설명서
33
33
PAPER
PRINTER MAINTENANCE
TO CHANGE THE INK CARTRIDGE
When printouts become faint, it might be
necessary to change the ink cartridge. Con-
tact your Hanna authorized center.
necessary to change the ink cartridge. Con-
tact your Hanna authorized center.
TO INSERT THE PAPER ROLL
The HI 9141 and HI 91410 use plain paper
rolls 38 mm large. To insert a new roll is very
easy.
rolls 38 mm large. To insert a new roll is very
easy.
Open the paper cover pulling gently on the tab.
Take the carton cylinder out.
Insert the paper edge in the printer slot and
feed the printer by pressing the PAPER key.
feed the printer by pressing the PAPER key.
Untitled-22
34
34
Allow approximately 5 cm (2") to exit from
the printer and replace the paper cover.
the printer and replace the paper cover.
TO RESET THE PRINTER
Take the battery
cover off by remov-
ing the screws. Us-
ing a pencil press
the black button.
This will reset the
printing mecha-
nism.
cover off by remov-
ing the screws. Us-
ing a pencil press
the black button.
This will reset the
printing mecha-
nism.
Before replacing the
battery cover inves-
tigate the cause of
the printer jam (e.g.
the paper caught
under the cover pre-
venting the printer
from advancing pa-
per feed).
battery cover inves-
tigate the cause of
the printer jam (e.g.
the paper caught
under the cover pre-
venting the printer
from advancing pa-
per feed).
Replace the battery
cover and secure
the screws.
cover and secure
the screws.
-
-
+
+
1.5V
1.5V
-
-
+
+
1.5V
1.5V
SCREW
POTS
RESET