Hitachi 32pd3000 사용자 설명서
23
vie
wlink
tuning in
Viewlink features - continued
PLEASE NOTE: Generally, the VCR cannot record a TV channel that cannot be received properly by the VCR’s
tuner, even though you can view that channel on the TV. However, some VCR’s can use the TV’s output to record
a TV channel. For details, refer to your VCR instruction manual.
tuner, even though you can view that channel on the TV. However, some VCR’s can use the TV’s output to record
a TV channel. For details, refer to your VCR instruction manual.
Direct TV Recording - continued
To Stop Recording - Press the VCR and Stop buttons
on your handset simultaneously. Recording will stop.
on your handset simultaneously. Recording will stop.
To operate via the VCR - refer to VCR instruction manual.
TV Auto Power On
If you insert a tape and press ‘PLAY’ on the VCR whilst the TV is in ‘Standby’ mode, the TV will automatically switch
ON and select AV1 so that you can view the tape.
ON and select AV1 so that you can view the tape.
VCR Auto Power Standby
If the TV is switched into ‘Standby’ mode, the VCR will also switch into ‘Standby’ mode, providing the VCR is not in
operation. (If rewinding a tape, the VCR will not switch into ‘Standby’ until rewinding has stopped.)
operation. (If rewinding a tape, the VCR will not switch into ‘Standby’ until rewinding has stopped.)
VCR Image View
If the TV is in ‘Standby’ mode, and a VCR menu is operated, the TV will automatically switch ON and the images from
AV1 terminal will be displayed on screen.
AV1 terminal will be displayed on screen.
VCR Is Already Recording
The VCR cannot record because it is already
recording.
The VCR is recording from the televisions tuner. If the
channel is changed on the television, it will affect the
recording. However, menus and OSD’s will not affect
the recording.
The VCR is recording from one of its AV connections.
The television can be switched off and recording will
not be affected.
There is no signal on the selected VCR input (VCR
tuner or external AV connection).
The VCR is recording one of its own channels. The
television can be switched off and recording will not
be affected.
The VCR is recording from its own tuner, using a
frequency sent by the television, i.e. not one of the
VCRs own preset channels. The television can be
switched off and recording will not be affected.
The VCR cannot record because of a problem
other than listed.
The VCR cannot record because the tape write
protect tab is missing.
There is a problem with the tape in the VCR (tape
tangled, faulty, snapped etc.).
Tape Is Write Protected
VCR Has Tape Problems
VCR Has No Signal To Record
VCR Not Recording
VCR Recording from VCR External
VCR Recording Preset
VCR Recording From TV
VCR Recording from VCR Tuner
1
9
8
7
6
5
4
3
2
X832136-02-02(En) 9/13/02 10:39 AM Page 23