Hitachi VM-E220A 사용자 설명서
General Maintenance
- 46 -
TAPE DISPLAY
Symptom
Check Point & Correction
TAPE appears in the viewfinder.
§ Have you moved the camcorder or
cassette from a cold place to a warm
place so that its temperature
changed abruptly? If the temperature
has changed, remove the cassette
and set the CAM/OFF/VIDEO switch
to OFF, then wait for about one hour.
Remove the cassette and then try to
reinsert: remove it several times. If
the indication is still shown in the
viewfinder, use a cleaning tape to
clean the heads and replace the
cassette.
place so that its temperature
changed abruptly? If the temperature
has changed, remove the cassette
and set the CAM/OFF/VIDEO switch
to OFF, then wait for about one hour.
Remove the cassette and then try to
reinsert: remove it several times. If
the indication is still shown in the
viewfinder, use a cleaning tape to
clean the heads and replace the
cassette.
Specifications
General Specifications
Power requirements
6V DC
Power consumption
5.3W (when recording)
Dimensions
3-11/16" W x 4-3/4" H x 8-5/16" D (94mm x 120mm x 211mm)
Weight
1.87 lbs (approx. 850g) without battery pack, lens hood, lens
cap
or
cassette
Operating temperature
32°F ~ 104°F (0°C ~ 40°C)
Storage temperature
-4°F ~ 140°F (-20°C ~ 60°C)
Video Recorder Specifications
Format
8mm
Record/playback
Two video record/playback heads
Video signal
EIA standard NTSC color
Tape
speed
14.3mm/sec
Video input
1.0Vp-p, 75 ohm
Video output
1.0Vp-p, 75 ohm
Audio
input
-7.8dBs
(316mVrms)
Audio
output
-7.8dBs
(316mVrms)
Fast forward/rewind time
Less than 8 minutes with P6-120 cassette
Camera Specifications
Scanning
525 lines/60 fields/30 frames
Required minimum illumination 1 lux
Pickup
Pickup
device
1/4"
C.C.D.
Lens
diameter
46mm
For U.S.A. only
HITACHI
Service Hotline
To locate an authorized
HITACHI service facility
in the continental U.S.A.
To locate an authorized
HITACHI service facility
in the continental U.S.A.