Gianni Industries AD-425S 사용자 설명서
Copyright All Rights Reserved.
P-MU-AD425S Ver. A Publish:2008.07.11 Page: 1/ 20
P-MU-AD425S Ver. A Publish:2008.07.11 Page: 1/ 20
AD-425S Automatic Door Operator
Instruction Manual
General Safety Precautions
z This instruction manual is intended solely for use by qualified professionals. All
installations, electrical connections and adjustments must follow the installation
instructions.
instructions.
z
Please read this manufacturer's instructions carefully before installing this unit. Incorrect
installation may result in severe personal injury and/or damage to property.
installation may result in severe personal injury and/or damage to property.
z
Packaging materials (plastic and polystyrene, etc) should be disposed of without causing
environmental damage and should be kept out of reach of children.
environmental damage and should be kept out of reach of children.
z
Do not install this unit in a chemical explosive environment or atmosphere to prevent a
risk of explosion. The location of this unit is important in achieving proper performance
and normal operating life. This unit should be installed in a safe operating condition
risk of explosion. The location of this unit is important in achieving proper performance
and normal operating life. This unit should be installed in a safe operating condition
z
Make sure the construction‘s strength and stability are up to standard. Manufacturer will
not be held responsible for any damage resulting from incorrect use of this unit.
not be held responsible for any damage resulting from incorrect use of this unit.
z
These safety devices (e.g. photocell and emergency stop) must follow the technical
safety regulations and current safety standards, including limiting of forces and speeds to
ensure the door operator works very well at all times.
safety regulations and current safety standards, including limiting of forces and speeds to
ensure the door operator works very well at all times.
z
The safety devices must protect any areas where the risk exits of being crushed, cut or
gagged or where there are any other risks generated by the motorized door or gate.
Apply hazard areas notices required by applicable regulations.
gagged or where there are any other risks generated by the motorized door or gate.
Apply hazard areas notices required by applicable regulations.
z
Each installation must clearly show the identification details of the motorized door/gate.
Encoder
Photocell