Oricom p900 사용자 설명서

 

 

13

Take two different calls at the same time 
If you have subscribed to your telephone network operators Call Waiting 
Caller ID service, your phone will display the number of the second 
incoming call for around 60 seconds while you are talking on the phone.  
 
During a call, you will hear two loud beeps periodically to notify you of 
another incoming call.  If you wish to answer this call 
 
1.  When the handset receives a second call, the number of the caller 

appears on the display. It will display for 60 seconds or until you 
press a key on the phone. Press      listen for dial tone then 

Press 2 to put the current call on hold and talk with the second caller.   

2.  Subsequent presses of     listen for dial tone then Press 2 will 

toggle you between these 2 callers.   

 
Caller information of this second call will be stored in the call log. 
 
 
 
 

If you subscribe to the Caller ID service, your phone automatically stores 
the last 10 incoming calls.  Each record holds up to 20 digits.   
 
When the phone rings and caller information is received, the display will 
show the last 12 digits of the callers number.   If there is an identical 
phone number stored in the phonebook, that phonebook name will be 
displayed instead of the CID name. 
 
Reviewing CID records 
1. Press 

 

  when the phone is in standby.  If the call log is not 

empty, 

 turns on and the caller name of the most recent CID 

record is displayed.    

2. Press 

 

  to view the number.  

3. Press 

 

  again to see the date / time when the call was received.  

4.  Whether you are viewing the name, number or date/time, pressing 

     will display the next older record and     the next newer record. 

 
When 

 turns on, it means that received number is a new number.