Omron cx-programmer 5.0-function block operation 사용자 설명서

1.

Start the CX-Programmer and select New from the File Menu.

2.

In the Change PLC Window, select a Device Type that supports function
blocks. These are listed in the following table.  

Press the Settings Button and select the CPU Type. For details on other 
settings, refer to the CX-Programmer Ver. 5.0 Operation Manual (W414).

1.

When a project is created, a Function Blocks icon will appear in the project
workspace as shown below. 

2.

Function block definitions are created by inserting function block defini-
tions after the Function Blocks icon. 

Function blocks can be defined by the user using either ladder programming
or structured text.

1.

Select Function Blocks in the project workspace, right-click, and select
Insert Function Blocks - Ladder from the popup menu. (Or select Func-
tion Block - Ladder from the Insert Menu.) 

1.

Select Function Blocks in the project workspace, right-click, and select
Insert Function Blocks - Structured Text from the popup menu. (Or se-
lect Function Block - Structured Text from the Insert Menu.)

CS1G-H

CPU42H/43H/44H/45H

CS1H-H

CPU63H/64H/65H/66H/67H

CJ1G-H

CPU42H/43H/44H/45H

CJ1H-H

CPU65H/66H/67H

CJ1M

CPU11/12/13/21/22/23

Function Blocks will appear under the PLC.