Hitachi 50ES1K 사용자 설명서

should use 75-Ohm coaxial shielded wire. Cables can be purchased from most stores 
that sell audio/video products. Below are illustrations and names of common 
connectors. 
Before purchasing any cables, be sure of the output and input connector types required 
by the various components. Also make sure the cables are the correct length. 

  

 

 

This outdoor antenna cable must be connected to  

an antenna adaptor (300-Ohm to 75-Ohm). 

 

For connecting RF signals 

(antenna or cable 
       TV) 

to 

the 

antenna 

jack 

on 

the 

television. 

 

 

 

 

Used on all standard video and audio cables which   This connector is used on 
camcorders, VCRs, 
connect to inputs and outputs located on the    

and laser disc players with an S-

Video feature 
Television's front and rear jack panels.   

 

in place of the standard video 

cable to produce 
       a 

high-quality 

picture. 

VHF (75- ) antenna/CATV(cable TV) 
When using a 75-ohm coaxial cable system, connect the outdoor antenna or CATV 
coaxial cable to the VHF/UHF 75-ohm terminal. 

 

VHF (300- ) antenna/UHF antenna 
When using a 300-ohm twin lead from an outdoor antenna, disconnect the VHF or UHF 
indoor antenna leads from screws of the VHF or UHF adaptor, and connect outdoor 
VHF or UHF antenna leads to these screws of the VHF or UHF adaptor.