Hitachi 50ES1K 사용자 설명서

This "Artificial Intelligence" sensor will make automatic picture adjustments depending 
on the amount of light in the room to give the best picture. See page 34. 

Point your Genius Remote at this area when selecting channels, adjusting volume, etc. 

• Match the numbers below to the diagram for speaker placement and refer to the table 
for the surround sound requirements. 

The television's internal speakers. 

 These speakers are connected to a separate audio amplifier. Use the "Audio to Hi-Fi" 

output on the TV. 

 These speakers are connected to the Rear Speaker 8  output on the TV. These 

speakers are used as "fill-in" speakers for the surround feature so they won't sound as 
loud as the other speakers in the system. This is needed to create the special "movie 
theater-like" sound effect. 

Click to see Audio System Set-Up 

* See page 11 for location of surround switch. 

Click to see Rear Panel Jacks. 

Use an "F" type coaxial cable to connect an antenna or cable TV (CATV) output to this 
rear panel jack. 

The "AVX" (Auxiliary video) button will step through each video source and the input 
each time it is pressed. Use the audio and video inputs to connect external devices, 
such as VCRs, camcorders, laser disc players, video games, etc. 

These jacks provide fixed audio and video signals which are used for recording. 

These jacks provide variable audio output to a separate stereo system amplifier. With 
this connection, the audio to the stereo can be controlled by the television's remote 
control.