honda-power-equipment bf2d 사용자 설명서
2.5 lbf·ft (3.4 N·m , 0.35 kgf·m)
2.5 lbf·ft (3.4 N·m , 0.35 kgf·m)
0.05 US qt (0.05 L)
45
Gear Case Oil Change
SERVICING YOUR OUTBOARD MOTOR
GEAR OIL
LEVEL SCREW
LEVEL SCREW
GEAR OIL DRAIN/
FILL SCREW
FILL SCREW
GEAR OIL BOTTLE
Improper disposal of gear case oil
can be harmf ul to the environment.
If you change your own oil, please
dispose of the used oil properly.
Put it in a sealed container, and
take it to a recycling center. Do
not discard it in a trash bin, dump
it on the ground, or pour it down
the drain.
can be harmf ul to the environment.
If you change your own oil, please
dispose of the used oil properly.
Put it in a sealed container, and
take it to a recycling center. Do
not discard it in a trash bin, dump
it on the ground, or pour it down
the drain.
Allow the used oil to drain
completely, then install an oil
pump adapter in the oil drain hole.
completely, then install an oil
pump adapter in the oil drain hole.
OIL DRAIN PLUG TORQUE:
OIL LEVEL PLUG TORQUE:
GEAR OIL CAPACITY:
Change the gear case oil with the
engine stopped and the outboard
motor in the vertical position.
engine stopped and the outboard
motor in the vertical position.
If water or contaminated (milky-
colored) oil flows out the drain
hole when the screw is removed,
have the outboard motor checked
by an authorized Honda Marine
dealer.
colored) oil flows out the drain
hole when the screw is removed,
have the outboard motor checked
by an authorized Honda Marine
dealer.
Add oil through the oil drain hole
until it flows out the oil level hole,
and then install the oil level screw.
Remove the pump adapter and
install the oil drain/fill screw.
until it flows out the oil level hole,
and then install the oil level screw.
Remove the pump adapter and
install the oil drain/fill screw.
Outboard motor SAE 90 hypoid
gear oil API Service category (GL-
4)
gear oil API Service category (GL-
4)
Avoid losing more than 1 fl oz (30
cm ) while reinstalling the drain/
fill screw.
cm ) while reinstalling the drain/
fill screw.
Place a suitable container below
the oil drain hole to catch the used
oil, then remove the oil level screw
and oil drain/fill screw.
the oil drain hole to catch the used
oil, then remove the oil level screw
and oil drain/fill screw.
3.
1.
2.
3
11/03/03 17:12:16 31ZW6620_046