OKI lan 510w 사용자 설명서

EAP 
authentication 

fails.

Check the network configuration of the wireless card.
• Make sure that IP Address, Subnet Mask and Default 

Gateway are all set correctly.

• Ad-Hoc mode: IP Address cannot be obtained by 

DHCP.

Check the network protocol:
• The wireless card supports only TCP/IP protocol.
• Ethernet and IPX/SPX are not supported.

Check the configuration of the wireless card:
• SSID, WEP Key and WPA Pre-Shared Key are all 

case sensitive.

• In the Shared Key mode, check the Key Index and 

Key SIze.

The supported scheme is EAP-TLS. Make sure that the 
RADIUS Server access point supports EAP-TLS.

EAP CA 

Certificate

Supported key sizes and encryption schemes:
• Key Scheme = RSA or DSA
• Key Size = 512, 1024, 2048 or 4096 bit.
• Hash Scheme = md5 or sha1.

“Client Auth” must be included in the “Extend Key 

Usage” attribute of the Client Certificate.

The “EAP User” setting in the wireless card must 
match the Client Certificate setting.

The CA Certificate must be provided by the Certificate 
Authority that directly issued the Server Certificate.