OKI network 7120e 사용자 설명서

OkiLAN 7120e Network User’s Guide

70

Check the network cable is correctly connected. The green LED near the 
network interface should be lit. Otherwise, change the cable and try again.
If the standard configuration utility is used, check the NetWare network 
number in the environment settings. 
If the NetWare protocol is disabled, set it to 

.

Reset the network interface card to factory default settings.

The network interface card is identified by the setup utility but not 
by the NetWare server.

Start up the NetWare server and check the NIC configuration.
Check the NSAP packet on the NetWare server is not set to 

.

Check the correct print server is operating on the file server.
Check the Print Server name operating on the File Server and the Print 
Server name set in the NIC are the same.
Check the Printer name displayed in the Print Server monitor of the File 
Server and the NetWare Port name set in the NIC are the same. If there 
are multiple network interface cards, configure the NetWare Port names to 
be different.

Check the File Server name set in the NIC and on the File Server are the 
same.
Check the Printer name set in the File Server and the NetWare Port name 
set in the NIC are the same. If there are multiple NICs, configure the 
NetWare Port names to be different. 
Check the NetWare login password is correct.
Check the Machine name is the same as the Print Server name set in the 
File Server.

Printer does not print.

Check the network cable is correctly connected. 
Change the cable and try again.
Turn the printer off and on again.
Check the NIC is connected to the File Server.
Check the printer driver has been mapped to the correct netware queue.