Vivitek RP56HD21-A 사용자 설명서

3

 
 
 

 
The remote control can learn up to 25 additional functions from the 
component’s original remote control. 
 
Example: 
Your DVD player remote control has a scan function that you may use 
frequently. There is not a scan button on the remote control. You can assign 
a button and use the DVD remote to teach the remote control the scan 
function. 
 
Important 

Make sure that you have already programmed the remote 
control for the component. See “ Programming the Universal 
Remote Control” on page 12. 

 

  Make sure that area lighting is not too bright or it will interfere 

 

  with the learning process. 

 
 
 

Press and hold the SETUP button on the remote control until the LED 

flashes twice. 

Press 975. The LED flashes twice. 

Press the component button that you want (DVD) once. 

Press the button that you are assigning the new function to. The LED 

flashes quickly while it is waiting to receive the signal from the teaching 
remote. 

Hold the teaching remote control approximately 1-inch (2.54cm) from the 

remote control making sure that the infrared ports are lined up, then 
press the button on the teaching remote that you want the remote to 
learn. The LED flashes twice. 

Press the SETUP button to exit learning mode.