Hoyt recurve-2000 사용자 설명서
15
Locking Screw
(Opposite Side of
Sight Window)
(Opposite Side of
Sight Window)
Washer
Thumb Screw
Alignment Dowel
(Sight Window Side)
(Sight Window Side)
Riser
Alignment Washers
Adding washers to the dowel moves your limb
tip to the right, as removing them moves the
tip to the left. Refer to page 13 for alignment.
alignment dowel.
2. Unscrew the alignment locking screw and remove the align-
ment cap and washers. Pull the alignment dowel and washers
ment cap and washers. Pull the alignment dowel and washers
out from the sight window
side of the pocket. (Do not
lose any parts !).
side of the pocket. (Do not
lose any parts !).
3.
(Refer to the limb visual
on page 13) If your limb is
showing Condition A: Simply ADD washers to the SIGHT WIN-
DOW SIDE (MAXIMUM OF 4) of the alignment dowel. If
your limb is showing Condition B: REMOVE WASHERS from
the sight window side of the dowel. Limit your adjustments to
one washer at a time. You can store any unused washers between
the riser and alignment cap because the washers on the align-
ment cap (non-sight window) side of the pocket do not affect the
alignment.
DOW SIDE (MAXIMUM OF 4) of the alignment dowel. If
your limb is showing Condition B: REMOVE WASHERS from
the sight window side of the dowel. Limit your adjustments to
one washer at a time. You can store any unused washers between
the riser and alignment cap because the washers on the align-
ment cap (non-sight window) side of the pocket do not affect the
alignment.
4. To reassemble the pocket, first insert the alignment dowel and
washers in the riser (be sure to always put the alignment dowel
washers in the riser (be sure to always put the alignment dowel
Axis Hard lock System