Delorme pn-20 사용자 설명서

68

69

•  Spring (green)
•  Summer (yellow)
•  Autumn (orange)
•  Winter (blue)
•  Midnight (high contrast—black/gray/dark blue; helpful for nighttime use)

3.  To modify the backlight intensity, highlight the Backlight Intensity slider and press the arrow  

 

keypad to the right to increase the intensity level or to the left to decrease the intensity.

4.  To modify the backlight timer, highlight the Backlight Timer drop-down list and press ENTER.  

 

Highlight the time interval you want and press ENTER. 

Note: Decreasing the Backlight Timer helps conserve battery life.

5.  Press QUIT to return to the Device Setup Page.

To Modify the Interface Settings
Use the following steps to change the serial port and USB settings on the device. The setting you 

choose will depend on the type of cable you use to connect the device to your computer, your com-

puter’s  operating  system,  and  if  you  are  trying  to  access  information  on  a  removable  media  (SD) 

card.

1.  From the Device Setup Page, highlight the Interface option and press ENTER.
2.  If you are connecting the device to your computer via a serial cable, highlight Enable Serial  
 

Port and press ENTER to select the check box. If the Enable Serial Port check box is selected,  

 

it indicates that the serial port connection is activated.

 

To clear the check box if it is selected, highlight Enable Serial Port and press ENTER.

 

OR

 

If you are connecting the device to your computer via a USB cable, highlight the USB Setting  

 

drop-down list and press ENTER. Then, highlight DeLorme or one of the Mass Storage options  

 

and press ENTER.

 

Notes: 

•  Mac and Linux users should always select one of the Mass Storage options for the USB  

  setting (depending on if you are saving data on internal or removable memory). 
•  If you want to access the files on your SD card and you do not have an SD card reader, select  

  Mass Storage: SD/MMC Card as the USB setting.
•  Select DeLorme if you are using the device with compatible DeLorme mapping software.

3.  Press QUIT to return to the Device Setup Page.

Use the following instructions to modify the device’s button press sound, message sound, power 

sound, turn alert sound, and/or the volume of all sounds.

1.  From the Device Setup Page, highlight the Sound option and press ENTER.
2.  To  modify  the  button  press  sound,  highlight  the  Button  Press  drop-down  list  and  press  

 

ENTER. Highlight the sound type you want and press ENTER.

3.  To modify the message sound, highlight the Message drop-down list and press ENTER. Then,  

 

highlight the sound type you want and press ENTER.

4.  To  modify  the  Power  sound,  highlight  the  Power  drop-down  list  and  press  ENTER.  Then,  

 

highlight the sound type you want and press ENTER.

5.  To  modify  the  turn  alert  sound,  highlight  the  Turn  Alert  drop-down  list  and  press  ENTER.  

 

Then, highlight the sound type you want and press ENTER.

6.  To modify the volume of all sounds, highlight the Volume slider control and press the arrow  

 

keypad to the right to increase the volume (or to the left to decrease the volume).

7.  To  mute  the  sound,  highlight  the  Mute  field  and  press  ENTER.  Note:  This  does  not  mute  

 

the warning sound when power is critically low. To enable sound again when the check box is  

 

selected, highlight the Mute field and press ENTER to clear the check box.

8.  Press QUIT to return to the Device Setup Page.