Uniden BC246T 사용자 설명서

40

Note: Make sure the scanner's antenna is connected 
before you turn it on.

1. Turn Sql fully counterclockwise.

2. Press and hold 

 for about 2 seconds to turn on the 

scanner, then turn Vol clockwise until you hear a hiss-
ing sound.

3. Turn Sql clockwise until the hissing stops.

To begin scanning programmed systems, press Scan. 
The BC246T scans all unlocked systems in all activated 
quick-key groups.

Notes: 

• If no systems are programmed, or all systems are 

locked out, an error message appears. Program a 
system or select a system to scan.

• When scanning multiple systems, the BC246T scans 

systems according to the assigned quick key. Sys-
tems assigned to quick key 1 are scanned first, then 
2, 3, 4, etc. Systems not assigned to a quick key are 
scanned last. Within a quick key, systems are 
scanned in the order they were assigned.

• Within a system, channels are scanned according to 

the assigned channel group, with the same priority as 
described above for systems.

• The BC246T scans a system for the duration you set 

using the System Hold Time option (see “Setting the 
System Hold Time” on Page 63). For trunked sys-
tems, the scanner moves to the next system after the 
hold time expires, the current transmission ends, and 
the channel delay expires. Conventional systems 
operate similarly, but all unlocked channels are 
scanned at least one time regardless of the hold time 
setting.