Uniden BC246T 사용자 설명서

79

Custom Search lets you program and search 10 custom 
search ranges. You can search any of these ranges 
simultaneously and select each custom search range you 
set.  During custom search, the scanner searches starting 
with the lowest frequency in the search range you select 
to the highest frequency in the range.

Notes: 

• Search ranges are preset. See “Editing a Custom 

Search Range” on Page 80 to change the range.

• You cannot turn off all custom search ranges.

1. Press 

 then turn the scroll control until Search 

For ...

 appears. Then press E. Or, press 

 + Src, 

then select No. One of the search feature options 
appear.

2. Turn the scroll control until CUSTOM Search appears, 

then press E to select it. The scanner starts custom 
search of the custom search range you selected, 
stopping on any transmission it finds and displaying 
the frequency. Turn the scroll control to change the 
search direction. An arrow appears, showing the 
current search direction.

To turn search ranges on or off, press 0 and 1-9. 

To hold searching, press Hold. To resume searching, 
press  

then 

press 

Scan/Srch or Hold again. 

To lock out a frequency found while searching, press 

L/O. Search Lockout? appears. Press E to lock out 
the frequency or No to continue monitoring.

If you turn off the active custom search range, the 

scanner skips to the next custom search range and 
continues searching.

Note: If all frequencies in all active custom search 

ranges are locked out, All Locked! appears and the 
scanner does not search.