Hanna Instruments ebsero 사용자 설명서

Ebsero

Ebsero

BATTERY REPLACEMENT:
• When the Ebsero  cannot be

switched on or the display
fades, pull out the rear cover,
remove the battery cover and
change all three 1.4V batter-
ies, paying attention to the po-
larity.
Batteries should only be re-
placed in a safe area using
the battery type specified in this
instruction manual.

HI 76504/P3 3 x 1.4V batteries

Before using this product, make sure that
it is entirely suitable for the environment
in which it is used. Operation of this
instrument in residential areas could cause
interference to radio and TV equipment.

Any variation introduced by the user to
the supplied equipment may degrade the
instrument's EMC performance.

To avoid electrical shocks, do not use this
instrument when voltage at the
measurement surface exceed 24 VAC or
60 VDC.

To avoid damage or burns, do not perform
any measurement in microwave ovens.

ISTREBSER1 02/97