Maretron gps100 사용자 설명서

 

 

 

 

 

 
PGN 126992 – System Time 
The GPS100 uses this PGN to provide a regular transmission of UTC time and date and to 
provide synchronism for measurement data. The factory default for periodic transmission rate 
is once per second. The transmission of this PGN can be disabled (see PGN 126208 – NMEA 
Request Group Function – Transmission Periodic Rate). 
 Field 1:  SID – The sequence identifier field is used to tie related PGNs together. For 

example, the GPS100 will transmit identical SIDs for 126992 (System Time), 128259 
(Speed), 129026 (COG and SOG, Rapid Update), 129029 (GNSS Position Data), 
129539 (GNSS DOPs), and 129540 (GNSS Satellites in View) to indicate that the 
readings are linked together (i.e., the data from each PGN was taken at the same 
time although they are reported at slightly different times). 

 

2:  Source – This field is used to indicate the type of time source, therefore this field 

always reads as 0 (GPS). 

 

3:  Reserved (4 bits) – This field is reserved by NMEA; therefore, this field always 

contains a value of 0xF (the GPS100 sets all reserved bits to a logic 1) 

 

4:  Date – This field is used to indicate the UTC Date in resolution of 1 day (the number 

of days since January 1, 1970). 

 

5:  Time – This field is used to indicate the UTC Time in resolution of 1x10

-4

 s (24 hour 

clock, 0.0000 = midnight). 

 
PGN 127258 – Magnetic Variation 
The GPS100 uses this PGN to provide a regular transmission of magnetic variation. The 
factory default for periodic transmission rate is once per second. The transmission of this PGN 
can be disabled (see PGN 126208 – NMEA Request Group Function – Transmission Periodic 
Rate).  
 Field 1:  SID – The sequence identifier field is used to tie related PGNs together. For 

example, the GPS100 will transmit identical SIDs for 126992 (System Time), 128259 
(Speed), 129026 (COG and SOG, Rapid Update), 129029 (GNSS Position Data), 
129539 (GNSS DOPs), and 129540 (GNSS Satellites in View) to indicate that the 
readings are linked together (i.e., the data from each PGN was taken at the same 
time although they are reported at slightly different times). 

 

2:  Variation Source – The GPS100 uses the WMM2005 for variation, therefore this field 

always reads as 5 (WMM2005). 

 

3:  Reserved (4 bits) – This field is reserved by NMEA; therefore, this field always 

contains a value of 0xF (the GPS100 sets all reserved bits to a logic 1) 

 

4:  Age of Service (Date) – This field is used to indicate the UTC Date in resolution of 1 

day (the number of days since January 1, 1970). 

 

5:  Variation – This field is used to indicate the magnetic variation where positive values 

represent Easterly and negative values represent Westerly variation. 

 
PGN 128259 – Speed 
The GPS100 uses this PGN to provide a regular transmission that describes the motion of a 
vessel. The factory default for periodic transmission rate is disabled. The PGN can be