Nortel Networks meridian m3902 사용자 설명서

Your telephone call features

Your network administrator assigns features to your programmable feature keys.
Whenever this guide describes a procedure that requires special codes ask your
network administrator to provide these to you.
To access a feature, you press a Feature Key, or enter a Flexible Feature Code
(FFC) for the Meridian 1 or a Feature Access Code (FAC) for the Meridian SL-100.
Your network administrator supplies you with the Flexible Feature Codes or
Feature Access Codes for your system.
Note:

In order to use a feature described in this section, your system software must

support the feature and the feature must be assigned to your telephone. Check
with your network administrator for more details.

Use handsfree calling (M3902, M3903, and M3904)

If your telephone is an M3902, M3903, or M3904 you can use the built-in
microphone and speaker instead of the handset to make or receive a handsfree
call. While on an active call, you can switch between Handset and Handsfree
mode.

To answer a call with handsfree:

Press the

Handsfree

Key. You are now

on a handsfree call.

To discontinue a handsfree call:

Press the

Goodbye

Key to end the call.

To mute a handsfree call:

1. Press the

Mute

Key. The LED indicator

flashes.

2. Press the

Mute

Key again to return to a

two way handsfree conversation.

To switch from handsfree to handset:

1. Lift the

handset

to switch from

handsfree to handset.

Goodbye

Mute