Honeywell MS-9600LSE 사용자 설명서

MS-9600LS Series Manual — P/N 52646:B2  2/12/2010

109

Programming



The main circuit board NAC type can be programmed by pressing 2 while viewing NAC Screen #1.  
The following screen will be displayed.  Press the down arrow key to view additional screens:

Select the NAC device type by pressing the number corresponding to the type in the appropriate 
screen.  When the selection is made, the display will return to NAC Screen #1.

The following table contains NAC type codes and their functions:



Pressing 3 while viewing NAC Screen #1 will cause the display to change to Silenceable No.  This 
will prevent the selected main circuit board NAC from being silenced by pressing the Alarm 
Silence key or by the Auto Silence feature.  Each press of the 3 key will cause the display to toggle 
between Silenceable Yes and Silenceable No. 

Important:  When a Notification Appliance Circuit with a mix of audible and visual devices is 
programmed for silenceable and the Synced Strobe feature is selected, only the audible devices 
will be turned off if the Silence key is pressed.  The visual devices (strobes, etc.) will continue to 
operate.  If the Strobe Sil Sync feature is selected, Silence will turn off both audible and visual 
devices.

Bell

None

Horn

None

Strobe

None

Synced Strobe

Synchronized to manufacturer

Strobe Sil Sync

Same as Synced Strobe but Silence turns off audible & visual devices

Future Use

None

Future Use

None

Future Use

None

Blank

None

   NAC #

1=ENABLED

2=TYPE

3=SILENCEABLE

NAC Screen #1

       NAC TYPE

1=BELL

2=HORN

3=STROBE