Uniden UM380 사용자 설명서

10 English

 x

You cannot transmit while in scan mode. 

 x

You must have two or more channels in memory to start a scan. 

 x

To save a channel into memory, select the channel, then press and hold 

 for two 

seconds. Memory will show on the display. 

 x

To remove a channel from memory, set the radio to that channel, then press and hold 

 for two seconds. Memory will no longer show on the display. 

 x

To activate scan mode, press and hold 

. Press and hold 

 again to return 

to the previous mode. 

 x

When the radio automatically stops on a channel, press 

 to leave that channel 

and resume scanning. 

 x

To end the scan, press the microphone’s 

or 

 buttons. The 

radio remains on the last scanned channel. 

Scan mode with Weather Alert Watch 
If you activate Weather Alert Watch while operating in scan mode, the radio checks the most 

recently-used weather channel 

every seven seconds, then 

continues scanning the next 

channel in memory.
To turn Weather Alert Watch on 

or off, press and hold 

 

while the radio is idle. Select 

Setup and then WX Alert Mode. 

Use 

 and 

 to choose WX Alert  Mode 

setting ON or Off. 
Scan mode with Triple and Dual Watch 
If you activate Triple Watch while operating in scan mode, the radio checks channels 16 and 

9 every two seconds, then goes on 

to scan the next channel; with 

Dual Watch turned on, the radio 

only checks channel 16.
Press and hold 

 on the 

radio for two seconds to turn 

Triple/Dual Watch on or off. (To 

change between Triple or Dual 

Watch, see page 14.) 
Press and hold the 

 key to turn off Scan mode and set the radio to Triple/Dual Watch 

mode. 

Every 2 

seconds, the radio checks 

channels 9 & 16 then goes on 

to the next channel.

UM380_20101221.indd   10

4/13/2011   11:25:09 AM