Uniden UM380 사용자 설명서

다운로드
페이지 56
 Making a Distress Call 
Lift the red cover. Press and hold the 
DISTRESS
 button for three 
seconds. Your radio transmits your boat’s location every few minutes 
until you receive a response.
 
#
nOte: if the radio displays Enter User MMSI, cancel the automatic 
distress call and make a normal voice distress call.
Making a Voice Distress Call
Speak slowly - clearly - calmly.
For future reference, write your boat’s name & call sign here: 
1.  Make sure your radio is on. 
2.  On the radio, press the 
16/9-TRI
 button to switch to Channel 16 (156.8 MHz). (If the corner 
of the display does not show 16, press the 
16/9-TRI 
button again until it does.) 
3.  Press the 
PUSH TO TALK
 button on the microphone and say: “MAYDAY -- MAYDAY -- 
MAYDAY.” 
4.  Say “THIS IS {name of your boat (three times) and call sign/boat registration number 
(once).
5.  Repeat “MAYDAY {name of your boat}” once.
6.  Tell where you are: (what navigational aids or landmarks are near, or read the latitude 
and longitude from your GPS). 
7.  State the nature of your distress (e.g. are you sinking, medical emergency, man 
overboard, on fire, adrift, etc. ).
8.  State the type of assistance you need (medical, towing, pumps, etc.).
9.  Give number of persons aboard and conditions of any injured persons. 
10. Estimate present seaworthiness of your ship (e.g. how immediate is the danger due to 
flooding or fire or proximity to shore). 
11. Briefly describe your ship, giving ship name (e.g. “Blue Duck is 32 foot cabin cruiser, 
white hull, blue deck house.”) 
12. Say: “I WILL BE LISTENING ON CHANNEL 16.” 
13. End message by saying “THIS IS {name or call sign of your boat}, OVER.” 
14. Release the 
PUSH TO TALK
 button and listen. 
if you do not get an answer after 30 seconds, repeat your call, beginning at step 3, above. 
Lift the red cover 
and press the 
DISTRESS
 button.
UM380_20101221.indd   2
4/13/2011   11:25:05 AM