Uniden UM380 사용자 설명서

16 English

7.  To delete the FIPS code, select Delete. To edit the code, select Edit, then use 

 

and 

 buttons to change each of the six digits. 

8.  When you are satisfied with the list of FIPS codes, select Exit to close the menu screen. 

Contrast 
Your radio display has 10 levels of contrast. To adjust the contrast, press and hold 

 

while the radio is idle. Select System and then Contrast. Use 

 and 

 to 

change the contrast to your desired level. 
To restore the default contrast setting, turn the radio off. Press 

 and hold it in while 

you turn the radio on. 
Lamp adjust 
Your radio has 10 brightness levels on the display. To adjust the brightness, press and hold 

 while the radio is idle. Select System and then Lamp Adjust. Use 

 and 

 to change the brightness to your desired level. 

Turning the key beep on and off 
Key beep is the tone that sounds when you press a key or a button. To turn off the key beep, 

press and hold 

 while the radio is idle. Select System and then Key Beep. Choose Off 

to turn off the key beep. 

You will see different display messages on your radio depending on what state your radio is 

in. Refer to the following table for a description of what displays according to what condition 

the radio is in. For example, if you turn on your radio and it is  connected to a GPS unit but 

the GPS is not sending data, the radio displays Check GPS. At the 30 minute mark with no GPS 

data input from the GPS unit, the radio display changes to Input Position.

From power on to 

30 minutes

Yes

None Normal

Yes

None Error *

No

None

None Normal

At 30-minute mark 

after power on

#

Yes

None Normal

Yes

Yes

Error * (continuous 

display)

No

Yes

Normal (continuous 

display)

Up to 4 hours after 

receiving valid 

GPS data

Yes

None Error

No

None

None Normal

UM380_20101221.indd   16

4/13/2011   11:25:11 AM