Uniden UM380 사용자 설명서

다운로드
페이지 56
19
English
You can get more information on MMSI numbers at these resources: 
 x
The dealer where you purchased the radio 
 x
Recreational boaters can obtain an MMSI number from the Boat Owner’s Association 
of the U.S. (http://www.boatus.com/mmsi/ or call 800-536-1536) or Sea Tow Services 
International (http://seatow. com/boating_safety/mmsi.asp) 
 x
Commercial boaters need a ship station license to get an MMSI number. For more 
information, visit the Federal Communications Commission (FCC) website at http://
wireless.fcc.gov/marine/ fctsht14.html. 
entering MMsi numbers 
Individual or User MMSI Number 
 
#
nOte: Be sure you have the correct user MMsi number before entering it in the radio. the 
radio only allows you to enter the user MMsi once. if you need to re-enter the user MMsi 
number, contact customer service (see back page for contact information). 
Follow the steps 
below to enter your individual or user MMSI number into the radio:
1.  Display the normal menu and choose the Setup sub-menu. 
2.  Select User MMSI. (If an MMSI number was already entered, the screen displays it with 
the message Cannot change over 1 time. Contact customer service. (See back page for 
contact information.). 
3.  Use 
CHANNEL UP
 and 
CHANNEL DOWN
  to enter the first of the nine digits; 
CHANNEL UP
 
increases the number and 
CHANNEL DOWN
 decreases it. 
4.  When the first digit is correct, press 
ENT-1W/25W
. The cursor moves to the next digit. Enter 
the remaining eight digits of the MMSI number in the same way.  If you make a mistake 
while entering a number, press 
CLR-SCAN
 to erase the wrong number and the cursor is 
moved to the left digit.
5.   When the ninth digit is correct, press 
ENT-1W/25W
. The radio displays the new MMSI 
number and asks you to confirm. To save this MMSI number, select Yes; the radio asks 
for confirmation again. To cancel this MMSI number, select No; the radio returns to the 
Setup menu.
 
#
nOte: Be sure you entered the number correctly before confirming the entry. You can only 
save the user MMsi once. 
6.  Before saving the number, the radio displays a final confirmation screen and reminds 
you that this is a permanent setting. Press 
ENT
 to accept this MMSI. Press 
CLR
 to return to 
the User MMSI Entry screen 
0
________
Use the up and down arrows 
to adjust each of the nine 
digits in turn.
16
User MMSI
Back[CLR] Forward[ENT]
User MMSI
Setup
Press and hold -  
[New]
UM380_20101221.indd   19
4/13/2011   11:25:11 AM