Uniden UM380 사용자 설명서

29

English

#

If you have unread incoming DSC calls, the radio displays a message icon. You will be able 

to review who has called. The radio displays the last 10 distress calls and the last 20 non-

distress calls it received (see the receive log on page 24). 

Your radio can sit at any angle in the mounting bracket so it can easily accommodate the best 

location. First, determine the best place to mount the radio. For optimum performance, find a 

location that can: 

 x

Properly support the weight of the radio, approximately 2.2 pounds or 1.0 kilograms. 

You may need to use some type of anchor with the mounting screws to hold the radio, 

depending on the surface. 

 x

Keep the battery leads as short as possible. 

 x

Keep the antenna lead-in wire as short as possible. 

 x

Allow free air flow around the heat sink on the rear of the radio. 

 x

Avoid interference with the ship’s compass. 

1.  Install the radio into the mounting bracket. 

2.  Position the radio into 

the desired location. 

Mark the edges of 

the bracket on the 

mounting surface. 

3.  Remove the mounting 

bracket drill template 

from the back of the 

manual, and use the 

template to mark 

the drill holes on the 

mounting surface. 

4.  Drill the holes for the 

mounting bracket; 

be sure to follow any 

special requirements 

of the mounting surface.

5.  Remove the bracket from the radio,

and use the mounting hardware to secure the 

bracket to the mounting surface.

6.  Install the radio back into the mounting 

bracket.

Step 1: 
Slide the radio 
into the mounting 
bracket.

Step 2: 
Tighten the mounting knobs 
to secure the radio in place.

Hex bolt

Washer

Spring washer

Hex nut

Mounting 

bracket

Mounting 

surface

UM380_20101221.indd   29

4/13/2011   11:25:15 AM