Honeywell av8or 사용자 설명서
AV8OR User’s Guide Aviation Mode Operation
System Setup Function
System Setup Function
Pub. No D200803000008 Page 3-87 Revision July 2008.
© Honeywell International Inc. Do not copy without express permission of
Honeywell.
Figure 3-109: System Setup – Demo Mode Setup Ident Details
• Initial Position: Determines the latitude and longitude of where
the simulator flight starts. The user can input the latitude and
longitude.
longitude.
• Altitude: The simulators altitude can be set to any altitude
between 0 and 99900 feet in 100-foot increments or between 0
and 30500 meters in 100-meter increments.
and 30500 meters in 100-meter increments.
• Groundspeed: The simulators speed can be set to any value
between 0 and 999 in any of the selected speed units.
• Track: Set the initial track from the initial WPT. Track can be set
to any value between 0 and 359 degrees.
When all the parameters have been entered tap the RESTART
DEMO soft key to restart the simulator and return to the System
Setup Menu.
DEMO soft key to restart the simulator and return to the System
Setup Menu.
Device Setup
This page lets the user to configure the external interfaces (GPS
Receiver, Flight Plan Source, and WX Receiver) to the unit.
Receiver, Flight Plan Source, and WX Receiver) to the unit.