Uniden Marine Radio 사용자 설명서

10

1.

Turn the unit on by rotating the power/volume control clockwise.

2.

Adjust the 

control counterclockwise until you hear

background noise, and then turn it clockwise just until the noise
disappears.

Triple Watch monitors Channel 16 and Channel 9 for activity every two
seconds while scanning or monitoring.

To activate Triple Watch, press and hold 

until two short beeps are

heard. The TRI indicator appears on the LCD panel, indicating Triple
Watch mode is in effect. If a signal is received on either Channel 16 or
Channel 9, the radio remains on that channel until the signal ends.

Press and hold 

until a tone is heard to cancel Triple Watch Mode.

To manually select a channel, press the 

▲/▼ buttons (▲/▼)

to select the desired channel. Weather Channels are located on
Channels 0 - 9. Communication Channels are located on Channels 01 -
28 and 60 - 88.

To access instant Channel 16 or Channel 9 communications, press 

.

This overrides the channel selected with the 

▲/▼ selector

buttons or any scanning activity. The Channel Display indicates the unit
is on Channel 16. Press 

again to access Channel 9

communications. Press and release 

a third time to release the

switch (Off). The transceiver will return to the channel selected prior to
accessing instant Channel 16/Channel 9 communications. The Channel
Display will indicate the selected channel.

UT881BL  OCEANUS-bk  11/25/02  10:28 AM  Page 10