Uniden dect 1806 사용자 설명서

Charging of the Handset batteries takes place automatically when the Handset is placed on
the Main Base or  Additional Charger.
An LED on the side of the Base Station indicates that the Handset is charging.
When first setting up, the batteries should be charged uninterrupted for 15-20 hours; this
will ensure that they are fully charged.
In use, it is advisable to return the Handset to the Charge Base to be charged at regular
intervals. After fully charging the Handset during setting up, the Handset should never
require longer than about six hours to return to its fully charged condition, e.g. overnight.
When the battery is fully charged:
• 6 Hours talk time
• 120 Hours Standby time

3

SETTING UP

Talk Key: Pressing            is equivalent to picking up a conventional 
telephone. 

Memory Key: Used to access Dialling Memories.

Up/Down (Cycle) Key: Some settings offer a series of options, 
e.g. Five ring styles are offered. These options can be selected either by 
pressing the appropriate number key or by cycling through the options using
the             key.

Redial / Pause Key: Recalls and displays the last four telephone numbers
called. 

Flash / Call Waiting: Used to access call waiting or to access some features
of a business PABX

Internal Call Key: If you have more than one handset registered on the
Main Base, then internal calls may be made between these handsets.

Program Mode: Used to programme speed dial numbers and 
telephone settings.

Power / Delete Key: The Power / Delete Key serves three functions on 
the Handset:
Power On/Off
Last Digit Delete
Program Abort 

Only use the
batteries supplied or
rechargable AA Ni
Cad batteries. DO
NOT USE
STANDARD
BATTERIES.

Dect 1802 Qk  7/19/02  3:45 PM  Page 7