Uniden bct7 사용자 설명서

The

BCT7

is designed to be used in any vehicle which has a 12-volt DC negative ground electrical system. If you cannot

determine the polarity of your vehicle, consult your vehicle dealer for information.

1. Connect the

BCT7

power cord

directly to the fuse block or battery
of your car.

- OR -

Plug one end of the cigarette lighter
power cord into your vehicle’s
cigarette lighter.

2. Connect the power cord to the

jack marked “DC 13.8V” on the
back of the radio.

3. Attach the external antenna

connector to the jack marked
“ANT.”

The power cord provided with your

BCT7

contains a 1-amp fuse. Whenever necessary, replace it only with

the same type of fuse.

Uniden recommends using an external antenna designed specifically for scanning radios.

26