Konica Minolta bizhub c30p 사용자 설명서
Clearing Media Misfeeds
196
Staple Finisher (Case 3)
If the media misfeed occurred in the center section of the staple finisher, fol-
low the procedure described below to remove the misfed media.
low the procedure described below to remove the misfed media.
1
Open the finisher cover.
2
Clockwise turn the knob on the
inside until the media is fed into
the main output tray.
inside until the media is fed into
the main output tray.
3
When the media is fed into the
main output tray, lift up the sub
output tray, and then slowly pull
out the media.
main output tray, lift up the sub
output tray, and then slowly pull
out the media.