Dodge 2007 sprinter 사용자 설명서

Clean light-alloy wheels on a regular basis.

 Turn key to position 1 in ignition lock 

 Switch on windshield wipers 

 When the wiper arms are vertical, turn 

key to position 0 in the ignition lock or 

remove the key.

 Fold the wiper arms away from the 

windshield until you feel them engage 

in place.

 You can now clean the windshield and 

the wiper blades.

 Fold the windshield wipers back again 

before you switch on the ignition.

G

Dirty or iced-up steps and entrances create 
a risk of slipping or falling.

Keep steps, entrances and footwear free 
from dirt (e.g. mud, clay, snow and ice).

!

CAUTION

Do not allow water to enter the intake 
and ventilation openings.

When cleaning with high-pressure wa-
ter or steam cleaners, the spray must 
not be aimed directly at electrical com-
ponents or at the end of electrical 
lines.

Treat the engine with preservative 
agents after cleaning. Protect the belt 
drive system from the preservative 
when you do so.

!

CAUTION

Do not use any acidic or alkaline clean-
ing agents. They can cause corrosion of 
the wheel bolts (wheel nuts) or the bal-
ancing weight retainers.

!

CAUTION

Do not fold the windshield wipers away 
from the windshield unless the hood is 
closed. You will otherwise damage the 
hood.

G

Switch off the ignition before cleaning the 
windshield or the wiper blades. The wind-
shield wipers could otherwise move and in-
jure you.