Dodge 2007 sprinter 사용자 설명서

3 Tensioning lever
4 Jack
5 Vehicle tool kit
 Remove the vehicle tool kit.
 Pull tensioning lever 3 upward and 

unhook the retaining strap of jack 4.

 Remove jack 4 upward out of the re-

tainer.

If you are replacing the tires on the vehicle, 

you may use the spare wheel as a road 

wheel provided that:
 the tires are no more than 6 years old
 the wheel and tire have the same spec-

ified design as the road wheels

The spare wheel is located in a spare wheel 

bracket under the rear of the vehicle.

More information about tire inflation pres-

sures can be found in the "Operation" sec-

tion (

 page 213).

1 Cover
2 Recess
 Open the rear doors ( page 61).
 Insert a screwdriver into recesses 2 

and pry off covers 1.

 Using the wheel wrench from the vehi-

cle tool kit (

 page 300), now unscrew 

the visible bolts approximately 

20 turns counterclockwise.

i

Place the jack into the retainer as 

shown when storing it back into place. 

Make sure that the jack’s retaining 

strap is hooked in and tensioned.

!

CAUTION

Check regularly that the spare wheel is 

secured correctly.