Dodge 2007 sprinter 사용자 설명서
312
Practical hints
Changing bulbs
5
License plate lamp
W 5 W
1 Bulb holder with lens
2 Recess
Insert a screwdriver or similar imple-
2 Recess
Insert a screwdriver or similar imple-
ment into recess 2 and carefully pry
off lens 1.
Pull the bulb out of the bulb holder.
Insert the new bulb.
Align lens 1 and clip it in, making sure
Insert the new bulb.
Align lens 1 and clip it in, making sure
that it engages.
Clearance lamp*
W 5 W
(cargo and passenger vans only)
1 Securing screw
2 Lamp housing
Undo screw 1 and remove lamp
2 Lamp housing
Undo screw 1 and remove lamp
housing 2 in the direction of the
arrow.
Turn the bulb holder and remove it
together with the bulb.
Pull the bulb out of the bulb holder.
Press the new bulb into the bulb holder.
Screw the bulb holder containing the
Press the new bulb into the bulb holder.
Screw the bulb holder containing the
bulb into the lens.
Replace lamp housing 2 in the oppo-
site direction to the arrow and retight-
en screw 1.
Side marker lamps*
W 5 W
The lamps are mounted on the side of the
vehicle.
1 Lens
2 Bulb holder
Insert a screwdriver or similar imple-
2 Bulb holder
Insert a screwdriver or similar imple-
ment at the side and carefully pry off
lens 1 in the direction of the arrow.
Turn bulb holder 2 in the direction of
the arrow and remove it together with
the bulb.
Remove bulb 2 from the bulb holder.
Press the new bulb into bulb holder 2.
Screw bulb holder 2 together with the
Press the new bulb into bulb holder 2.
Screw bulb holder 2 together with the
bulb into the lens.
On vans and crewbuses, reattach the
lens together with bulb holder 2.