Dodge 2007 sprinter 사용자 설명서

 Using red positive terminal clamp 1 of 

the jumper cable, slide the red protec-

tive cap of the jump-starting connec-

tion point back with a clockwise turn 

and connect the positive terminal 

clamp of the jumper cable to the posi-

tive terminal of the jump-starting con-

nection point.

1 Positive terminal of jump-starting con-

nection point (under cover)

2 Positive terminal of donor battery
3 Negative terminal of donor battery
4 Ground contact of own vehicle

(negative terminal of your own battery)

 Run the other vehicle’s engine at idling 

speed. 

 Connect negative terminal 3 of the 

donor battery to ground contact 4 of 

your own vehicle.
Start with the donor battery.

 Start the engine.
 Disconnect the jumper cable from neg-

ative terminal 3 of the battery and 

ground contact 4 first, then from pos-

itive terminal 2 of the battery and 

jump-starting connection point 1.
The red protective cap springs back to 
its initial position when the terminal 
clamp is removed from the jump-start-
ing connection point.

 Have the battery checked at an 

authorized Sprinter Dealer.

Use a rigid towing bar and secure this only 

to the front towing eye (

i

Do not connect the jumper cable to the 

auxiliary battery* in the engine com-

partment. This is not suitable for jump-

starting operations.

!

CAUTION

Your vehicle is equipped with an auto-

matic transmission. Do not tow-start 

your vehicle.

G

When tow-starting another vehicle, its 
weight should not be greater than the per-
missible gross weight of your vehicle.