Namco Bandai Games 90500094 사용자 설명서
Page 19
NOTE:-
When the machine is fully assembled and in its final position, lower the 8 level
adjusters, with a spanner, so that all castors are raised from the floor by
approximately 5mm, and the machine is level. Tighten the lock nuts with a
spanner to ensure that the level adjusters do not move.
adjusters, with a spanner, so that all castors are raised from the floor by
approximately 5mm, and the machine is level. Tighten the lock nuts with a
spanner to ensure that the level adjusters do not move.
If this machine is installed on a smooth or shiny floor, it is recommended that rubber
slip mats be placed under each adjustable foot to prevent the machine from moving
when being played.
slip mats be placed under each adjustable foot to prevent the machine from moving
when being played.
6.
Refit the Clamp Bracket using the 8off Hex Head Screws (M10x20), Spring
Washers and Flat Washers so that the Ski Pole Joint Bar is clamped securely to
the Monitor Cabinet.
Washers and Flat Washers so that the Ski Pole Joint Bar is clamped securely to
the Monitor Cabinet.
7.
Refit the Clamp Bracket Vac-Form using the 4off Security Screws (M5x16)