Nautilus t516 사용자 설명서

Tools Needed: 

• Hex Key

1 -  Using a hex key, turn the left and right adjusting 

bolts clockwise 1/2 turn (see Figure 1 and 1A). 

NOTE:  Use care to make each adjustment equal to 

ensure proper belt alignment. 

2 -  Test the belt by running on the belt at 

approximately 4 MPH. Then hold the handrail 
lightly and resist the belt movement with your feet. 
If walking belt slips, repeat Step 1. 

Tools Needed: 

• Hex Key

1 -  Start the treadmill at minimum speed and incline. 

2-  Increase speed to 5 MPH and make the following 

adjustment:

a:  If the belt moves to the right, turn the right 

tension bolt one 1/4 turn clockwise. 

b:  If the belt moves to the left, turn the left tension 

bolt 1/4 turn clockwise. 

NOTE:  Run the belt for a minimum of 20 seconds 

after making the first adjustment and 
before making the second adjustment to 
the belt tracking. 

3 -  After making an initial adjustment, run the treadmill 

for five minutes and observe how the belt tracks. If 
the belt continues to move away from the center, 
adjust the appropriate side as in Step 2 until 
properly centered.