National Instruments 800 Series 사용자 설명서
© National Instruments Corporation
3-1
VXIpc 800 Series User Manual
Chapter
3
VXIpc 800 Series
Configuration and
Installation
Configuration and
Installation
This chapter contains the instructions to configure and install the
VXIpc 800 Series embedded computer. Unless otherwise noted, these
instructions apply to all models in the VXIpc 800 Series, which
currently consists of the VXIpc-850 and the VXIpc-860.
VXIpc 800 Series embedded computer. Unless otherwise noted, these
instructions apply to all models in the VXIpc 800 Series, which
currently consists of the VXIpc-850 and the VXIpc-860.
Caution:
Electrostatic discharge can damage several components on your
VXIpc-800 module. To avoid such damage in handling the module,
touch the antistatic plastic package to a metal part of your VXI chassis
before removing the module from the package.
VXIpc-800 module. To avoid such damage in handling the module,
touch the antistatic plastic package to a metal part of your VXI chassis
before removing the module from the package.
Default Settings
This section summarizes the hardware default settings for the
VXIpc 800 Series for easy reference. The module is set at the factory
for the most commonly used configuration.
VXIpc 800 Series for easy reference. The module is set at the factory
for the most commonly used configuration.
Figure 3-1 shows the location and factory-default settings of most of the
configuration switches and jumpers on the VXIpc 800 Series.
configuration switches and jumpers on the VXIpc 800 Series.
!