Design Dynamics pfs vf-18n-mhd 사용자 설명서
www.fmiproducts.com
116986-01H
2
WARNING: This is an
unvented gas-fired heat-
er. It uses air (oxygen)
from the room in which
it is installed. Provisions
for adequate combustion
and ventilation air must
be provided. Refer to Air
er. It uses air (oxygen)
from the room in which
it is installed. Provisions
for adequate combustion
and ventilation air must
be provided. Refer to Air
for Combustion and Ven-
tilation section on page 5
of this manual.
tilation section on page 5
of this manual.
This appliance may be in-
stalled in an aftermarket,*
permanently located,
manufactured (mobile)
home, where not prohib-
ited by local codes.
This appliance is only for
use with the type of gas
indicated on the rating
plate. This appliance is
not convertible for use
with other gases.
stalled in an aftermarket,*
permanently located,
manufactured (mobile)
home, where not prohib-
ited by local codes.
This appliance is only for
use with the type of gas
indicated on the rating
plate. This appliance is
not convertible for use
with other gases.
* Aftermarket: Completion of sale, not for
purpose of resale, from the manufacturer
purpose of resale, from the manufacturer
saFeTy
WARNING: Improper
installation, adjustment,
alteration, service or main-
tenance can cause injury
or property damage. Refer
to this manual for correct
installation and operation-
al procedures. For assis-
tance or additional infor-
mation consult a qualified
installer, service agency or
the gas supplier.
alteration, service or main-
tenance can cause injury
or property damage. Refer
to this manual for correct
installation and operation-
al procedures. For assis-
tance or additional infor-
mation consult a qualified
installer, service agency or
the gas supplier.
WARNING: This ap-
pliance is for installation
only in a solid-fuel burning
masonry or UL127 factory-
built fireplace or in a listed
ventless firebox enclo-
sure. It is design-certified
for these installations in
accordance with ANSI
Z21.11.2. Exception: Do
not install this appliance
in a factory-built fireplace
that includes instructions
stating it has not been test-
ed or should not be used
with unvented gas logs.
only in a solid-fuel burning
masonry or UL127 factory-
built fireplace or in a listed
ventless firebox enclo-
sure. It is design-certified
for these installations in
accordance with ANSI
Z21.11.2. Exception: Do
not install this appliance
in a factory-built fireplace
that includes instructions
stating it has not been test-
ed or should not be used
with unvented gas logs.
TaBle oF CoNTeNTs
Safety .................................................................. 2
Unpacking............................................................ 4
Product Identification ........................................... 5
Local Codes......................................................... 5
Product Features ................................................. 5
Air For Combustion and Ventilation ..................... 5
Installation ........................................................... 8
Operation ........................................................... 15
Inspecting Burners ............................................ 19
Unpacking............................................................ 4
Product Identification ........................................... 5
Local Codes......................................................... 5
Product Features ................................................. 5
Air For Combustion and Ventilation ..................... 5
Installation ........................................................... 8
Operation ........................................................... 15
Inspecting Burners ............................................ 19
Cleaning and Maintenance ................................ 20
Troubleshooting ................................................. 21
Wiring Diagram .................................................. 24
Replacement Parts ............................................ 25
Service Hints ..................................................... 25
Technical Service............................................... 25
Accessories ....................................................... 25
Parts .................................................................. 26
Warranty ..............................................Back Cover
Troubleshooting ................................................. 21
Wiring Diagram .................................................. 24
Replacement Parts ............................................ 25
Service Hints ..................................................... 25
Technical Service............................................... 25
Accessories ....................................................... 25
Parts .................................................................. 26
Warranty ..............................................Back Cover