Dialogic M7324 사용자 설명서

The Dialogic

®

 PBX Integration Board can retrieve the information on its 

alphanumeric display using the d42_display( ) function. The function places 
the display data (48 bytes) in an application buffer. Refer to the Dialogic

PBX Integration Software Reference for more information about using the 
d42_display( ) function. 

An application uses the dx_dial( ) function and the appropriate dial string to 
press keys to dial extension number 1045. Then, the d42_display( ) function 
is used to retrieve the display data and place it in an application buffer (shown 
below). The information for the top row (first 24 characters) of the display is 
checked. Data in bytes 00 through 05 indicate that extension 1045 is being 
dialed.  

 

 

 

 

data 

61 32 01 00 04 05 20

 

20 20 20 20 20 20 20 20 20

 

byte 

00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15

 

 

 

data 

20 20 20 20

 

20 20 20 20 20 20 20 20 20 20 20 20

byte 

16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 

 

 

data 

20 20 20 20

 

20 20 20 20 20 20 20 20 20 20 20 20

  

byte 

32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47

 

 

 

If receiving a call on a Dialogic

® 

PBX Integration Board from another 

extension, the PBX sends calling number ID data (by default, the extension 
number of the telephone placing the call) to the station set between the first 
and second rings. The station set processes the data and sends an ID message 
to the display. The calling number ID data sent from the PBX to the station set 
differs from the calling number ID data presented on the display.