Dialogic M7324 사용자 설명서

An application uses the d42_indicators( ) function to retrieve the current data 
for the LCD indicators on a given channel on a Dialogic

®

 PBX Integration 

Board. The data placed in the application buffer is shown below. If the data 
for byte 23 is 0x07, the indicator for SPKR is red and on. Refer to the 
Dialogic

 PBX Integration Software Reference for more information about 

using the d42_indicators( ) function. 

Line Key 1

00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 xx 00 00 00 xx 00 00 07

00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23

00 00 xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx

24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47

Line Key 2

Line Key 3

Line Key 4

Line Key 5

Line Key 6

Line Key 7

Line Key 8

Line Key 9

Line Key 10

Line Key 1

1

Line Key 12

Line Key 13

Line Key 14

Line Key 15

Line Key 16

Not Used

MWI

CNF Key

FCN Key

Not Used

LNR/SPD Key

ANS Key

SPKR Key

ICM

MIC

 

The Dialogic

®

 PBX Integration Board can “press” any of the DTerm Series III 

Function keys using the dx_dial( ) function. Refer to the Dialogic

Integration Software Reference for more information about dialing 
programmable keys. Each Function key on the DTerm Series III telephone is 
assigned a dial string sequence (refer to 

). By using the dx_dial( ) 

function and the appropriate dial string, the PBX Integration Board can press 
any Function key. 

The MIC and ICM LED indicators are located between the Flexible Line keys 
and the keypad. In normal operation, these indicators show the status of the 
microphone and the intercom. When programming, these indicators are used 
as prompts. The MIC and ICM LED indicators can take any of the red states 
(0x00 – 0x07) listed in 

.