Uniden BCT15 사용자 설명서
101
Searching and Storing
Set Attenuator
to select to choose an attenuation for all frequencies in the range.
F
On — the frequencies are attenuated.
Off — the frequencies are not attenuated.
Set Record
to enable a live audio output from REC to an audio recording device.
F
On — the scanner outputs the signal.
Off — the scanner does not output any audio.
Assigning a Search Range to a Search Key
You can assign any of the Service or Custom Searches to the three Search keys
for quick access to your favorite searches.
for quick access to your favorite searches.
[MENU]
Search for ...
F
Set Search Key
F
Select the key to assign
F
Select a search range
F
[MENU]
Search for ...
F
Now, to access that search, hold on any channel, then press
F
and the number
key [4] to [6] corresponding to the search range.
The default settings are:
SRCH 1: Custom 1
SRCH 2: Public Safety
SRCH 3: Railroad
Saving a Found Channel (Quick Save)
Press [E
YES
] to save a channel’s frequency if you hold on a channel or detect a
channel, instead of using Direct Entry at another time. The alpha data is also
stored. If a GPS unit is attached, the longitude and latitude data is saved and also
becomes the name of the channel. For example, if the position is 32°57’33.60 N
latitude and 97°05’34.18 W longitude, the name saved is 3257.33-09705.34.
stored. If a GPS unit is attached, the longitude and latitude data is saved and also
becomes the name of the channel. For example, if the position is 32°57’33.60 N
latitude and 97°05’34.18 W longitude, the name saved is 3257.33-09705.34.