Uniden BCT15 사용자 설명서

다운로드
페이지 148
123
Using the BCT15 with a GPS
Another Example of Multiple Site 
Creation
The geographic area of Arlington, 
TX, is separated  into multiple  site 
locations to enable  automatic 
lockout and unlock as one moves 
from area to area.
Non-Radio Location Based GPS Features
When connected to a GPS, you can program specific location information which 
will trigger an alert from the scanner. The scanner becomes an extension of the 
GPS device.
The  following geographical values  are typical of  use you might  find valuable while 
traveling. Use the menu (begin with  Program Location) to input the necessary 
data to enable each.
• Dangerous Xing — Stores location, speed, and direction of travel. If you are in 
range, traveling greater than the set speed, and moving in the selected 
direction, the radio sounds an alert at .5, .25, and .1 miles (radius of a circle) 
from the point. These range distances are automatic and fixed.
• Dangerous Road — Stores location, direction of travel, and speed. If you are 
traveling at  a  speed greater than that specified,  in the direction  specified, and if 
you  are  within  range of the  set  location,  the scanner  sounds an alert at .5, .25, 
and .1 miles from the point. These range distances are also automatic and 
fixed.
• Points of Interest (POI) — Stores location and range. If you approach the set 
location, the radio sounds an alert up to 2 miles from the center.
Press 
F
 + [GPS] to choose a setting for Dangerous Xing, Dangerous Road, or 
POI.