Uniden BCT15 사용자 설명서
127
Using the BCT15 with a GPS
Location to be deleted
F
Delete Location
F
Confirm Delete? Yes=”E” / No=”.”
F
Make your choice to either delete the location or to cancel.
GPS Display Mode
If you press GPS, the scanner switches to a GPS display mode. In this mode, you
can see location information as well as information about your position relative to
the selected POI. The third line of the screen shows Off if no POI is selected.
can see location information as well as information about your position relative to
the selected POI. The third line of the screen shows Off if no POI is selected.
Rotate the Scroll Control to select different POI’s.
Press
F
+ [GPS] to toggle the Display mode in order.
GPS DATA Display
ETA Display
Clock Display
Elevation Display
Speed Display
Location Display
The BCD996T, a GPS, and a Dangerous Road
Car One is driving south. Car Two is driving
east. Car One is alerted since the Latitude
and Longitude of the Dangerous Road is
programmed as well as the Range and the
Direction. When all three conditions are
met, the alert sounds. Since Car Two is
going east, no alert sounds.
east. Car One is alerted since the Latitude
and Longitude of the Dangerous Road is
programmed as well as the Range and the
Direction. When all three conditions are
met, the alert sounds. Since Car Two is
going east, no alert sounds.
Car Two
Car One
41° 17’ 58.64” N
74°11’ 10.30” W
Heading South
74°11’ 10.30” W
Heading South
Programmed Settings